Jaw crusher is a Primary & Secondary Crushing machine In the stone production line, The Common Sizes in Chinese model 250x400, 400x600,500x750,600x900,750x1060,900x1200 For Primary Cruhing, And 250x 750,250x1000,250x1200,300x1300 For Secondary Crushing European 24X14,32X18,32X22,32X06,36X20, 36X22,36X24,42X30 ,42X32 44X26,48X42,40x8,50x40,40x54,60x73 as Etc.
The Common Repalcement Wear Parts of Jaw crusher is Jaw plates, Side Plate /Cheek Plates, Jaw Wedges, Toogle Plate, Toogle Bearing And Toogle Seat, The Jaw Plates consist with Fixed Jaw Tooth and Swing Jaw Tooth which the Fixed Jaw is wearing bit faster then the Swin Jaw ,and Cheek Plates having the left and right, upper and lower which the lower side plates is wearing much faster then the upper, The Jaw Wedge /jaw lock usually change when replacement of the jaw plates, it is mainly for fastern the jaw plates by the taper match with jaw and lock with bolt nut, Toogle assembly normally need change the Toggle plate and toggle bearings.
CASTEEL Jaw plate are manufactured with High Manganese steel of Mn13, Mn14Cr2, Mn18Cr2, Mn22Cr2 Meat With ASTM A128 Gr A & B2 & B3, BS 3100 Gr BW10, SABS 407 , we also do customized material with Molly Throughout special heat-treatment process The Jaw plate has a service life 30% longer than those of traditional high manganese steel!
The Jaw Tooth having Jaw Ribbed,Wide Tooth ,Corrugted,Coarse Corrugted, Super Tooth,Quarry tooth,Wave Tooth, Square tooth, Round Tooth ,Q Tooth, Slab Tooth Heavy Duty MX Tooth , Sharptooth And Flat Plate For Different Crushing conditions with machining or without machining at back and end side. The Big Jaw Plates also having 2 sections design (1plate 2Pcs) or 3 sections for easy installation and Revese , Especially The 3 sections Jaw plates design can be reverse 6 time as the midlle parts is not wearing fast as the lower part.